Kalzip has introduced an on-site production facility which uses a
portable roll-former suspended from a crane to manufacture aluminium
standing seam sheets where theyíre wanted - up on the roof. This
creatively engineered midair manufacturing solution is fast,
efficient, extremely safe and very versatile as the roll-former can
be quickly repositioned to produce long sheets of Kalzip anywhere
around the building or site.
The new midair manufacturing facility is not attached to the building in any way - the roll-former is mounted on a specially designed carrying cradle which is suspended from a tower or crawler crane. Powered by an integral generator, this self-sufficient production unit is Ďstabilisedí in its midair manufacturing position (about a metre away from the roofís eaves) by virtue of Tirfor winch-tensioned cables which run from its underside to large anchor weights on the ground below.
Kalzip employs the highest standards of safety at all times and this is exemplified by the fact that the roll-former unitís positioning in midair and all of the roof sheet production is managed and remotely controlled by a highly experienced operator safely positioned on the roof. There is also a large, clearly-marked Ďsafety exclusion zoneí beneath the roll-former which comes into operation whenever the machine is airborne and replenishing the coil is done swiftly and easily by lowering the cradle down to ground level.
Another safety factor is that roof level sheet handling activity is significantly reduced with midair manufacturing as itís the system thatís moved to where the sheets are needed. On-site roll-forming is a particularly convenient and cost-effective method of manufacturing long sheets - and most appropriate where site access is restricted. Kalzip can be produced in continuous sheet lengths in excess of 150 metres which virtually eliminates the need for end-lap joints and, with aluminium being much lighter than steel, labour requirements are further reduced.
On-site manufacturing is also environmentally beneficial as up to 5,000 sqm of coil can be delivered on a single trailer, which reduces CO2 emissions as well as saving transport costs. Administrative and organisational costs inevitably associated with the movement of very long loads by road are also eliminated and so perhaps itís no real surprise that demand for the on-site roll-forming of Kalzip is steadily increasing.
Kalzip has been manufactured on-site in the UK since 1997 - by roll-forming at ground level, ground to eaves level using an angled ramp up to eaves heights of 9 metres, and at eaves level where the machine is mounted on a purpose built scaffolding tower. Whilst each method has its own advantages, this new midair manufacturing facility certainly provides the safest option of producing long sheets of Kalzip at various roof level locations on buildings with eaves heights ranging from 10 metres up to at least 30 metres.
Employing the best quality components and materials throughout, all Kalzipís site rolling equipment from ground level to crane hook has been structurally engineered, fully tested and certified to achieve the highest standards of safety, reliability and efficiency.
To view Kalzipís midair manufacturing video, please visit: www.kalzip.com